Descripción

  • MultiCore technology
  • Reading of printed and directly marked 1D and 2D codes
The scanner weQubeDecode is based on the wenglor MultiCore technology. Omnidirectional scanning enables decoding of printed, needle-punched, laser-engraved or etched codes on various materials in any orientation. Good scanning results are even obtained with poor code quality. In addition to the established 1D codes it is also suitable for scanning various 2D codes. A list of readable code types is found in the operating instructions.
Working Range ? 20 mm
Resolution 736 ? 480 Pixel
Image Chip monochrome
Light Source White Light
Service Life (T = +25 °C) 100000 h
Visual Field see Table 1
min. Resolution 0,1 mm
Barcode Printing Contrast > 15 %
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Scan Rate 20 scans/sec
Temperature Range -25...55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III
Mechanical Data
Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 ? 1, 12-pin
Type of Connection Ethernet M12 ? 1, 8-pin, X-cod.
Safety-relevant Data
MTTFd (EN ISO 13849-1) 227,7 a
General Data
Web server yes
Function
1D and 2D code reading yes
Output
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.''