Descripción

  • Digital, analog and error output
  • Go/no-go testing possible
  • Red light
  • Triple beam correction principle
These sensors are equipped with an analog output, as well as a digital output. The upper and lower switching points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.
Working Range 300...600 mm
Measuring Distance 450 mm
Measuring Range 300 mm
Resolution see Table 1
Linearity 1 %
Switching Hysteresis 20 mm
Light Source Red Light
Wavelength 660 nm
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Light Spot Diameter see Table 1
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Cut-Off Frequency 50 Hz
Response Time 10 ms
Temperature Drift 100 µm/K
Temperature Range -10...60 °C
Switching Output Voltage Drop < 2,5 V
PNP Switching Output/Switching Current 200 mA
Error Output Voltage Drop < 2,5 V
PNP Error Output/Switching Current 200 mA
Analog Output 0...10 V
Output Current Analog Output 500 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
Mechanical Data
Housing Material Plastic
Degree of Protection IP67
Connection M12 ? 1, 8-pin
Output
Error Output yes
PNP NO yes
Analog Output yes
''