Descripción

  • 360° visible, two-color job display
  • Error prevention during partial picking processes in shelves and storage locations
  • Low mounting thanks to integrated reflector
  • Rugged aluminium housing
Pick to light light curtains use the single-lens reflex principle. The necessary reflector is pre-installed on the rear of the housing and serves as a reflective surface for the neighboring light curtain, making installation easier. The integrated two-color light from the job display is visible from 360° and shows both correct and incorrect picks.
Range 2000 mm
Min. Distance to Reflector 100 mm
Measurement Field Height (MFH) 270 mm
Beam Distance 30 mm
Switching Hysteresis < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle 2,5 °
Two-Lens Optic yes
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 60 Hz
Response Time 8 ms
Temperature Drift < 10 %
Temperature Range -25...60 °C
Switching Output Voltage Drop < 2,5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
Mechanical Data
Setting Method Teach-In
Housing Material Aluminum
Degree of Protection IP65
Connection M12 ? 1, 4-pin
Cable Length 250 mm
Housing Length (L) 396 mm
Reflector Length (RL) 324 mm
Output
PNP NO/NC switchable yes
''