Descripción

  • Electronic background suppression
  • Fully encapsulated
  • Scaled switching distance adjuster
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. They are thus protected against mechanical damage.
Range 760 mm
Potentiometer min 250...300 mm
Potentiometer center 400...550 mm
Potentiometer max 760...900 mm
Switching Hysteresis < 15 %
Light Source Infrared Light
Wavelength 880 nm
Service Life (T = +25 °C) 100000 h
Risk Group (EN 62471) 1
Max. Ambient Light 10000 Lux
Opening Angle 5 °
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption Sensor (Ub = 24 V) < 30 mA
Switching Frequency 100 Hz
Response Time 5 ms
Temperature Drift < 10 %
Temperature Range -25...60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1,5 V
PNP Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Logic no
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Full Encapsulation yes
Degree of Protection IP65
Connection M12 ? 1, 4-pin
Output
PNP NO/NC antivalent yes
''