Descripción

  • Industrial Ethernet
  • Reliable in case of glossy objects with WinTec
  • Secure detection of black objects also in extremely inclined positions with WinTec
  • Web server and graphic display for simple operation
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. Sensors with Industrial Ethernet make the analog and digital input cards at control units unnecessary, as all service and measurement data is read, analyzed and processed in the control unit in real time, without the need for conversion. Power over Ethernet connects data transfer and power supply in one cable and thus reduces the wiring effort.
Working Range 0,1...10,1 m
Reproducibility maximum 7 mm
Linearity Deviation 20 mm
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 2 mrad
Max. Ambient Light 5000 Lux
Light Spot Diameter see Table 1
Electrical Data
Port Type 100BASE-TX
PoE Class 1
Response Time 10 ms
Temperature Range -25...50 °C
Reverse Polarity Protection yes
Interface PROFINET
Protection Class III
Mechanical Data
Setting Method Menu (OLED)
Housing Material Plastic
Degree of Protection IP68
Connection M12 ? 1, 8-pin, X-cod.
General Data
Web server yes
Output
PROFINET IO, CC-B yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.''